View the Installation booklet and manual here.
The Lotus ATS-908 Elongated Bidet Seat fits elongated toilets only. For the Lotus ATS-908 Round Bidet Seat click here.
You will want to measure your toilet to make sure this bidet seat fits:
For a video on how to determine whether your toilet is round or elongated, click here.
For 2-piece toilets:
The Lotus ATS-908 will fit, provided you have measured and determined that your seat is elongated.
You also need to complete the following measurements:
1. Measure the distance between the bolt holes on the toilet. The standard is 5.5" but can range from 5.5" to 7.5". If your bolt holes are within this range you are good-to-go!
2. Measure the distance from the center of the bolt holes to the front of the tank. Most bidet seats require at least 1.75" of space.
For 1-piece toilets:
As long as the tank is flat and connects at a 90 degree angle to the toilet (see below) the Lotus ATS-908 Bidet Toilet Seat should fit.
Just be sure to complete the measurements shown above to determine that your toilet is elongated.
If your 1-piece toilet has a french curve, the Lotus ATS-908 bidet toilet seat will NOT fit.
For example, the Kohler Rialto toilet (French Curve) will NOT work with the Lotus ATS-908 Bidet seat.
The Lotus ATS-908 bidet toilet seat requires electricity.
For electric bidet toilet seat models where there is not an outlet nearby, a licensed electrician should be used to install one.
We recommend a dedicated 15 or 20amp GFI circuit be used, and local codes followed. Periodic maintenance and inspection of the unit is required.
Optional bidet water filters must be replaced every 6 months.
Hoses and all connections should be checked frequently.
This unit must be protected from freezing, and if not used for extended periods, it should be disconnected. Please contact us with any specific questions you may have.
